Rolling machine
Technical data sheet and spare parts list
Two Roll Mill
it is most common type of machine used in lab ,pilot ,production stage . our machine
are specifically design and made as per your usage . metal sheet,Cathode, anode are rolled in perfect
thickness . so these machine must have
a. High in rigidity
b. Holding gap tolerance at time of rolling
c. Straightness and parallelism in both roller
d. Roll material compatibility with sheet chemical
e. Contamination proof in sheets
f. Safety of operator
If machine hold above quality then sheet will be Perfect in thickness ,desirable surface texture .
Machine specs are as follow-
| Roller dia | >150 mm |
| Roler width | >300mm |
| Working width | >200mm |
| MOC | Ss,ms crome plated (as per customer specsification) |
| Bearing | Double roll |
| Asymmetric rolling | Yes possible (if in spefication) |
| Roller orientation | Horizontal / vertical |
| Roller RPM | 5<rpm<30(VFD drive ) |
| Operator panel | HMI |
| Power supply | >7.5 kw ,three phase |
| Frame | Ms powder coated frame |
| Tolerance clas | Iso 7-10 |
| Roll material | D2,ground finished |
| Hardness | >60 hrc |
| Roll round ness | <.01mm |
| Surface roughness | <.5 ra |
| Daylight of roller | <20mm |
| Bushing | Indian phosphor bronze(pb1) |
| Lubrication | Grease hand pump lining |
Saftey –
| Curtain sensor | For operator saftey |
| RCCB,over load relay | For motor protection |
| Kill switch | To avoid any damage |
| Covering of all moving parts | Yes |
Machine can be desigend as per spefic use of cutomer .
We have made some custom rolling machine for different user by design of machine to manufacture trail and testing .
Tekorange Engineering Private Limited,
Behind of Hanuman Temple,
Siddharth Nagar, Babarpur, Auraiya, U.P. 206121
+91 95821 25448
[email protected]
© Copyright 2026
